- Original price was: $2,699.00.$2,399.00Current price is: $2,399.00.
Unleash the full sonic potential of your Toyota Supra A90/A91 with the E6 Motorsports Valved Catback Exhaust System — engineered for performance, sound, and show-stopping aesthetics. Whether you opt for the ultra-lightweight titanium system with iconic burnt blue hues, or the aggressive and budget-friendly 304 stainless steel, this catback exhaust is built to perform on the street and the track.
Featuring a valved design, the system allows you to switch between quiet cruising and full-throttle roar at the push of a button. The beautifully mandrel-bent piping maximizes flow, increases throttle response, and enhances turbo sound without drone, delivering the perfect balance of refinement and rawness.
Key Features:
Fitment: 2020+ Toyota Supra A90 / A91 (MKV)
Valved Design: Electronically controlled valves for adjustable volume
Material Options:
Full Titanium: Lightweight, corrosion-resistant, iconic heat coloration
304 Stainless Steel: Durable and aggressive-sounding, polished finish
X-pipe midsection for smoother exhaust pulses and deeper tone
Mandrel-bent piping for optimal flow and performance
Includes exhaust valve controller (if needed)
Bolt-on installation using factory mounting points
Compatible with both stock and aftermarket downpipes
Whether you’re carving canyon roads, attending a show, or just enjoying your daily drive, this system delivers the performance, adjustability, and wow-factor your Supra deserves.
- Original price was: $3,000.00.$2,250.00Current price is: $2,250.00.
Unlocking the Pinnacle of V12 Sound
The 6.5-liter naturally aspirated V12 at the heart of the Lamborghini Revuelto is a masterwork of engineering, but strict factory emission systems suppress its true vocal capability. The E6 Motorsports Catless Performance Downpipes bypass those restrictive stock catalytic matrices entirely. By allowing exhaust gases to exit the engine with zero restriction, this setup produces immediate power gains across the rev range while laying the foundation for an uncompromised supercar sound profile.
Seamless Electronics: Included OBD2 Module
Upgrading to catless downpipes on modern exotic platforms typically triggers persistent catalyst efficiency fault codes. E6 Motorsports solves this issue directly out of the box by supplying a custom Plug-and-Play OBD2 Connector Module. This module interfaces with your vehicle’s onboard diagnostics to continuously monitor and manage sensor parameters, allowing you to enjoy maximum performance and full power delivery with zero warning lights or limp-mode interventions.
The Ultimate F1 Acoustic Combination
To achieve the legendary, high-frequency F1 scream that enthusiasts crave, pairing these catless downpipes with our E6 Motorsports Valved Catback Exhaust is the ultimate combination. The catless runners clean up low-frequency drone and elevate exhaust gas velocities, allowing the tuned X-pipe section of the catback to generate a soaring, high-pitched pitch as you sweep toward redline.
Technical Specifications & Features:
- Compatibility: 2024+ Lamborghini Revuelto (6.5L V12 HPEV Hybrid).
- Design: Full Catless High-Flow Performance Layout.
- Material: T304 Stainless Steel with integrated dimpled thermal insulation.
- Electronic Suppression: Includes dedicated Plug-and-Play OBD2 CEL Suppressor Connector.
- Sensors: Factory-position O2 sensor bungs included.
- Installation: Direct bolt-on replacement using OEM-style flanges and brackets.
Vehicle Fitment Guide:
- 2024+ Lamborghini Revuelto (V12 Hybrid)
Tags
Lamborghini Revuelto catless downpipes, Revuelto V12 F1 exhaust sound, Revuelto OBD2 CEL suppressor, E6 Motorsports Revuelto performance downpipes, Revuelto V12 high flow pipes, Lamborghini Revuelto heat shielded downpipes.
- $825.00 – $1,275.00
Upgrade your Mercedes AMG GT (C190) with our catted or catless downpipes, delivers a refined exhaust note, performance boost, and OEM-compatible fitment.
- $1,000.00 – $1,250.00
Upgrade your Mercedes AMG GT63 with our catted or catless downpipes, delivers a refined exhaust note, performance boost, and OEM-compatible fitment.
- $950.00 – $1,250.00
Unleash hidden horsepower and refine the acoustic intensity of your mid-engine V8. Engineered specifically for the Chevrolet Corvette C8 platform, these E6 Motorsports High-Flow Downpipes dramatically reduce exhaust backpressure right off the headers, accelerating exhaust velocity while protecting sensitive engine bay components with built-in thermal insulation.
Key Features:
- Integrated Heat Shielding: Encased in a heavy-duty, dimpled thermal heat shield to keep radiant engine bay temperatures down and protect surrounding components.
- Maximized Flow Velocity: Smooth mandrel-bent tubing reduces backpressure to unlock increased horsepower, sharper throttle response, and faster revs.
- O2 Sensor Compatibility: Features integrated, precision-welded O2 sensor bungs for seamless sensor re-installation.
- Heavy-Duty Flanges: CNC-machined thick steel mounting flanges ensure an airtight seal and distortion-free fitment under extreme thermal cycles.
- Direct Bolt-On Integration: Engineered as a direct replacement for the factory catalytic converters, mating cleanly to OEM headers and catback setups.
- $1,500.00 – $1,800.00
E6 Motorsport Downpipes for Lamborghini Urus
Unlock the full sound and performance potential of your Lamborghini Urus with the E6 Motorsport Downpipes, engineered to deliver maximum exhaust flow, sharper throttle response, and a far more aggressive exhaust note. These downpipes are a critical upgrade for enthusiasts looking to remove factory restrictions and allow the twin-turbo V8 to breathe the way it was meant to.
Available in both Catless and High-Flow Catalytic Converter configurations, you can tailor the system to your build. The catless option offers the highest possible flow and the most raw, motorsport-inspired sound. The high-flow catalytic version provides a balance between performance, sound, and emissions friendliness, making it ideal for street-driven performance builds.
Manufactured from premium stainless steel, these downpipes are built to handle extreme exhaust temperatures and boost pressures while maintaining long-term durability. Precision TIG welding, smooth mandrel bends, and high-quality flanges ensure perfect fitment and leak-free installation.
Each set is designed as a direct bolt-on replacement for the factory downpipes, making installation straightforward for performance shops and experienced installers. With reduced backpressure and improved exhaust efficiency, these downpipes significantly enhance turbo spool and overall power delivery.
Backed by a 5-year warranty, E6 Motorsport Downpipes represent a high-performance upgrade that combines reliability, sound, and power in one of the most important areas of your exhaust system.
Key Features
Designed specifically for Lamborghini Urus
Available in Catless and High-Flow Catalytic Converter versions
Constructed from high-grade stainless steel
Increased exhaust flow and reduced backpressure
Improved turbo response and power delivery
Aggressive, deeper exhaust tone
Direct bolt-on installation
Precision TIG welded construction
Built for high heat and boost conditions
Backed by a 5-year warranty
- Original price was: $775.00.$600.00Current price is: $600.00.
E6 Motorsports High-Flow Downpipes for Toyota Supra MK5 (A90/A91)
Unleash the full potential of your Supra.
Take your Toyota Supra (A90/A91) to the next level with the E6 Motorsports High-Flow Downpipes, engineered for maximum power, improved throttle response, and that raw turbocharged sound every B58 deserves.
Crafted from mandrel-bent 304 stainless steel, these downpipes reduce backpressure and increase exhaust flow, delivering gains in horsepower and torque across the RPM range. Available in both catless and high-flow catted options, depending on your performance and emissions requirements.
Designed with precision fitment for the 2020+ Toyota Supra, our downpipes install seamlessly with OEM and most aftermarket exhaust systems, and feature CNC-machined flanges for a leak-free seal under high boost.
🔧 Key Features
✅ Precision Fit for 2020+ Toyota Supra (A90/A91)
✅ T304 Stainless Steel Construction – Durable and corrosion-resistant
✅ Mandrel-Bent Tubing – Smooth, unrestricted exhaust flow
✅ Available in Catless or High-Flow Catted Options
✅ Noticeable Gains in Power and Turbo Response
✅ Aggressive Turbo Sound & Throttle Snap
✅ OEM Turbo and Exhaust Compatible
✅ O2 Sensor Ports & Heat Shielding Where Needed
💡 Performance Benefits:
🔥 +15-30 HP depending on supporting mods and tune
🔥 Faster turbo spool and reduced turbo lag
🔥 Amplified exhaust tone and pops under decel (especially catless)
⚠️ Installation Note:
Professional installation is recommended. A tune is highly recommended—especially for catless downpipes—to optimize performance and avoid CEL.
✅ Fitment:
Toyota Supra A90 / A91 (2020, 2021, 2022, 2023, 2024+)
BMW Z4 M40i (G29) also compatible
💬 Enthusiast-Backed. Track-Tested.
Trusted by tuners and tested under aggressive driving conditions, these downpipes are for the Supra owner who wants no compromises in performance or sound.
- $2,450.00 – $2,675.00
Upgrade your AMG GT (C190) with the E6 Motorsports Titanium Exhaust. Includes stainless steel options, both with optional valves.
- $2,400.00 – $3,000.00
Upgrade your AMG GT63 (X290) with the E6 Motorsports Titanium Exhaust. Includes stainless steel options, both with optional valves.
- $2,150.00 – $2,500.00
Upgrade yourBMW M3/M4 with the E6 Motorsports Titanium Exhaust. Lightweight construction delivers a refined exhaust note, performance boost, and OEM-compatible fitment.
- $2,000.00 – $3,250.00
Ferrari 458 Valved Catback Exhaust – Choose Titanium or Stainless Steel
Transform the sound and performance of your Ferrari 458 Italia, Spider, or Speciale with our valved catback exhaust, available in ultra-lightweight titanium or high-performance 304 stainless steel. Designed for maximum power gains, reduced weight, and an exhilarating F1-style exhaust note, this system is the perfect upgrade for any Ferrari 458 enthusiast looking for the ultimate driving experience.
Key Features:
Choose Your Material:
✔ Titanium: Ultra-lightweight, corrosion-resistant, and delivers a high-pitched, razor-sharp F1 sound
✔ 304 Stainless Steel: More affordable, durable, and provides a deep, aggressive tonePerformance & Sound Benefits:
✔ Valved Exhaust System – Switch between raw race sound and refined cruising mode
✔ Optimized Exhaust Flow – Improves power output, throttle response, and overall performance
✔ Exotic F1-Inspired Sound – Experience the iconic high-revving Ferrari scream at full throttle
✔ Weight Savings – Titanium reduces weight significantly for better handling and acceleration
✔ Direct Bolt-On Fitment – Designed for seamless installation with OEM-like fit and finishWhy Upgrade?
The factory Ferrari 458 exhaust system limits the full potential of its naturally aspirated 4.5L V8. Upgrading to a high-performance valved exhaust in either titanium or stainless steel delivers:
✅ Sharper throttle response
✅ Enhanced power-to-weight ratio
✅ More engaging, motorsport-inspired sound
✅ A truly race-ready experience, whether on the street or trackStainless Steel vs. Titanium – Which One to Choose?
- Titanium: Best for weight reduction & high-pitched F1 tone
- Stainless Steel: Best for affordability & deep, aggressive sound
No matter which option you choose, this exhaust system will make your Ferrari 458 sound and perform like a true supercar.
- $2,000.00 – $3,250.00
Ferrari 488 Titanium Valved Catback Exhaust + 304 Stainless Steel Catless Downpipes
Elevate the sound, performance, and driving experience of your Ferrari 488 GTB/Spider/Pista with our premium titanium valved catback exhaust and 304 stainless steel catless downpipes. Designed for maximum power gains, weight reduction, and an F1-inspired exhaust note, this system transforms your Ferrari’s twin-turbo V8 into an exhilarating symphony of performance.
Key Features:
Titanium Valved Catback Exhaust
✔ Ultra-Lightweight Titanium Construction – Reduces weight for improved handling and performance
✔ Valved Exhaust System – Switch between aggressive race sound and refined cruising mode
✔ Enhanced Exhaust Flow – Maximizes power output and turbo efficiency
✔ Exotic F1-Inspired Sound – High-pitched, sharp, and aggressive tone304 Stainless Steel Catless Downpipes
✔ High-Flow Design – Removes factory catalytic converters for improved exhaust flow and turbo spool
✔ Durable 304 Stainless Steel – Corrosion-resistant and built for high-performance applications
✔ Increases Power & Throttle Response – Gains in horsepower, torque, and turbo efficiency
✔ Track-Focused Sound – More pronounced turbo noises and aggressive exhaust toneSpecial Offer:
💰 Save $750 when purchasing the catback and downpipes together!
Both components can be purchased individually, but ordering them as a complete system maximizes performance and delivers the ultimate Ferrari 488 exhaust experience.Why Upgrade?
The factory Ferrari 488 exhaust system is restrictive, limiting the full potential of its 3.9L twin-turbo V8. By upgrading to a full titanium valved exhaust and high-flow downpipes, you’ll experience faster turbo spool, a sharper throttle response, and a more intoxicating sound.
This system is ideal for enthusiasts seeking the best balance of power, weight reduction, and sound—whether on the street or the track.
- $2,450.00 – $3,150.00
Elevate Your Lexus LC500 with the E6 Motorsports Valved Titanium Exhaust
Upgrade your Lexus LC500 with the E6 Motorsports Valved Titanium Exhaust, designed to enhance both performance and sound. This high-performance exhaust system features a valved design, allowing you to control the exhaust note for a tailored driving experience. Whether you’re looking for an aggressive tone or a more subdued sound, the E6 Motorsports exhaust provides the flexibility you need while improving overall vehicle performance.
Crafted from high-quality titanium, this exhaust is lightweight, durable, and resistant to heat and corrosion. It significantly reduces weight compared to the stock exhaust, improving handling and responsiveness. Engineered for seamless integration with the LC500, the exhaust offers an OEM-compatible fit for a hassle-free installation.
With its aggressive exhaust note and performance-driven design, the E6 Motorsports Valved Titanium Exhaust is the ideal upgrade for those seeking to unlock the full potential of their Lexus LC500.
Key Features:
- Fits Lexus LC500 models
- Valved design for adjustable exhaust sound
- Premium titanium construction for strength, weight reduction, and heat resistance
- Aggressive exhaust note for a dynamic driving experience
- Lightweight build for improved handling and performance
- OEM-compatible fitment for easy installation
- $1,750.00 – $2,000.00
Upgrade your AMG GT with the E6 Carbon AMG GT Pro Style Wing. Lightweight and designed for enhanced downforce, this carbon fiber wing improves performance and style with OEM-compatible fitment.
- $2,500.00 – $2,950.00
Unleash the full exotic potential of the mid-engine LT2 V8. Engineered with a precision X-pipe crossover, high-flow valved mufflers, and quad heat-treated tips, this system delivers an unmatched acoustic profile while shedding significant weight off the rear axle.
Key Features:
- Exotic Pie-Cut Craftsmanship: Features meticulous TIG welding and smooth mandrel bends for uncompromised internal exhaust velocity.
- Quad Heat-Treated Tips: Finished with distinctive burnt-gold/titanium-style quad tips for an aggressive rear visual statement.
- Dual-Mode Valved Sound Control: Integrated valves let you switch between a drone-free, civil cruise and an aggressive, open-throttle track howl.
- Dual Metallurgy Options: Available in premium T304 Stainless Steel or ultra-lightweight Grade 5 Titanium.
- Flexible & Vibration Isolation: Integrated heavy-duty flex pipes isolate engine movement to protect exhaust hangers and flanges.
Production and delivery lead time is approximately 4–5 weeks.
